You are here:  |   |  Waste To Energy

Waste to Energy

Lechler Environmental Division has many years of experience in designing and supplying Lime slurry injection nozzles and lances for waste to energy plants. We have been supplying these lances for over two decades to waste to energy plants for their spray dry scrubbers. Lechler lances require significantly lower maintenance and compressed air for operation. By using tungsten carbide material for nozzle fabrication, Lechler has reduced the nozzle wear considerably compared to the traditional materials available in the industry.

With our latest LOCTM System together with Lechler lances, we can completely eliminate manual cleaning of the nozzles thus reducing the maintenance cost considerably. We have recently installed this LOCTM system at a Waste to Energy plant and the plant did not clean the nozzle lances manually for more than 6 months.


LechlerUS-Shop:/images/02_produkte/umwelttechnik/Images_Waste_To_Energy/Waste_To_Energy.jpg


Related Products and Solutions:

Wet FGD

Wet FGD

Nozzles used in Wet Flue-gas Desulphurization.


Click for Wet Flue-gas Desulphurization Products

SDA (Spray Dry Absorber)

SDA (Spray Dry Absorber)

Nozzles, Lances and Systems used in Semi Dry Flue-gas Desulphurization in SDA applications.


Click for Spray Dry Absorber Products

NOx Removal (SCR & SNCR)

NOx Removal (SCR & SNCR)

SCR and SNCR nozzles, spray lances and systems.


Click here for NOx Removal Products

Gas Conditioning

Gas Conditioning

Gas conditioning requires extremely fine droplets distributed as evenly as possible within the gas flow.


Click for Gas Conditioning