| |
Descaling Nozzles |
Accessories
Descaling Nozzles
Scalemaster HP
 |
- For highest impact
and longest life
- time
- Alignment with two flats
- Mounting with lock nut
- Spray angle: 22°, 26°, 30°, 40°
- Nozzle insert made from tungsten
- carbide
- Max. pressure: 450 bar
- Volume rate at 100 bar: 12,00 l/min
- to 134 l/min |
MiniScalemaster HP
 |
- For highest impact
and longest
- lifetime at low spray
heights
- Alignment with two flats
- Mounting with lock nut
- Spray angle: 22°, 26°, 30°, 40°
- Nozzle insert made from tungsten
- carbide
- Max. pressure: 450 bar
- Volume rate at 100 bar: 12,00 l/min
- to 134 l/min |
MicroScalemaster
 |
- Smallest dimensions
for space
- saving mounting
- Alignment with two flats
- Mounting with lock nut
- Spray angle: 22°, 26°, 30°, 40°
- Nozzle insert made from tungsten
- carbide or hardened steel
- Max. pressure: 450 bar
- Volume rate at 100 bar: 12,00 l/min
- to 28 l/min |
MiniScalemaster
 |
- Standard nozzle
for small spray
- heights
- Alignment with two flats
- Mounting with lock nut
- Spray angle: 22°, 26°, 30°, 40°
- Nozzle insert made from tungsten
- carbide
- Max. pressure: 450 bar
- Volume rate at 100 bar: 12,00 l/min
- to 134 l/min |
Scalemaster
 |
- Standard nozzle
- Alignment with two flats
- Mounting with lock nut
- Spray angle: 22°, 26°, 30°, 40°
- Nozzle insert made from tungsten
- carbide
- Max. pressure: 450 bar
- Volume rate at 100 bar: 12,00 l/min
- to 134 l/min |
666
 |
- Traditional FUH4
nozzle
- Alignment with Dove-tail
- Mounting with lock nut
- Spray angle: 22°, 26°, 30°, 40°
- Nozzle insert made from tungsten
- carbide or hardened stainless
steel
- Max. pressure: 450 bar
- Volume rat at 100 bar: 12,00 l/min
- to 134 l/min |
Back to top
Accessories
Water Stop Valve
 |
- Stops the water
flow at low
- pressure
- For all Scalemaster nozzles
- Opening pressure except
- MicroScalemaster ca. 10
bar
- Large free cross section, low
- impact loss
- Ideal for plate-, stainless steel and
- Stecker mills |
Tip Extractor
 |
- For damage-free
disassembling of
- the nozzletip
- For all types of Scalemaster
- nozzles |
Alignment tip/blank tip
 |
- For alignment of
welding nipple
- before welding
- For closing of welding nipples for
- pressure test |
Sealing paste
 |
- Avoids galling between
lock nut
- and welding nipple |
Spray Headers
 |
- On request we will
design and
- manufacture complete spray
- headers |
Back to top
|
|
