Lechler maintenance kit for XactClean HP 2
To ensure your XactClean HP 2 rotary cleaner operates continuously and efficiently, we recommend performing regular maintenance intervals, depending on the operating conditions. As a general rule, we recommend maintenance after 750 hours of operation when operating at the recommended operating pressure of 3 bar. Under harsh operating conditions, the maintenance interval may be shortened accordingly. With our maintenance kit, specially designed for the XactClean HP 2, we offer you a way to perform maintenance yourself (except for ATEX versions), saving valuable time.
Scope of maintenance kits XactClean HP 2
Maintenance Kit 1 – For maintenance after 750 hours of operation
Lechler Original Maintenance Parts, Order Number 5S6.000.1Y.SP.10 with
- turbine
- cylindrical pin
- O-rings
Maintenance Kit 2 – For maintenance after 1,500 hours of operation
Lechler Original Maintenance Parts, Order Number 5S6.000.1Y.SP.20 with
- turbine
- Gearbox
- cylindrical pin
- O-rings
Maintenance Kit 3 – For maintenance after 2,250 hours of operation
Lechler Original Maintenance Parts, Order Number 5S6.000.1Y.SP.30 with
- turbine
- storage unit
- cylindrical pin
- O-rings
For maintenance 3, an assembly tool is also required:
Lechler assembly tool / special tool, order number 5S6.000.1Y.ST.00
Contact for further information and order acceptance
Service Division General Industry